PROJECTS
Commercial
UGM Shelter
Salem, OR
Merrick Lentz Architects
The new Union Gospel Mission building in Salem, Oregon is 3-stories tall with a steel frame structure. The roof is comprised of metal decking on steel bar-joists and the floors are comprised of concrete over metal deck supported on composite steel beams. The lateral system is Special Concentric Braced Frames (SCBF) which are highlighted by the architect on the interior. Attached to the main building is chapel with a vaulted roof made from large glulam beams and mass-plywood panels (MPP).
Open Road Transportation
Dallas, Oregon
Lakeside Investment Group
A new two-story office addition to an existing single story building more than tripled the floor area. New towers were added to the existing single story roof at the street-front corner and over the main entry to match the new roof line of the addition. Second floor utilized Mass Plywood Panels (MPP) to maximize the span and limit the floor depth. A mix of steel framing and traditional wood framing were used in this addition.
Aware Food Bank
Woodburn, Oregon
Anderson Shirley Architects
The original 1910 wood framed warehouse was destroyed by fire in 2021. Due to our prolonged relationship with Marion-Polk Food Share, our office provided the evaluation and assessment on the fire damaged building and served as EOR on the new 10,000 square foot replacement facility. The new building is designed explicitly to support retail and warehousing for food distribution
West Hills Winery Chapel
Salem, Oregon
Open Concept Architecture
Structural design of a new 3,400 sq. feet single story chapel with vaulted event space and large storage area over auxiliary rooms. Project design included hand framed bell tower
Roth & McGilchrist Building
Salem, OR
Studio 3 Architecture
The historic adaptive reuse and rehabilitation of the Roth & McGilchrist building has served to revitalize Salem’s downtown core. These two 1916 structures were stripped down to the original studs and conjoined to become one building. During demolition, a program of tenant spaces and occupant needs was developed. The Roth & McGilchrist building underwent major structural repairs and seismic upgrades, including concrete footings, shear walls, steel beams and columns, as well as hundreds of new floor joists.
Albany Carousel and Museum
Albany, OR
Carlson Veit Architects
This unique 21,840 sq. ft. single story with a basement structure is to house the Carousel and Museum for the City of Albany and is expected to be completed later this year at an expected construction cost of approximately $4 million. The Carousel building is constructed via the use of a 3-hinged arched glulam system that creates unimpeded height and breadth for the carousel while providing a pleasing aesthetic look inside. A warm facade encloses a conventional wood framing system throughout the main level.
Garmin Office Remodel and Addition
Salem, Oregon
Anderson Shirley Architects
A new 62,582 sq. ft. single story addition was designed as an addition to an existing 52,659 sq. ft. two-story building. The addition is a new office, conference and manufacturing space. Existing office and manufacturing areas are a part of the remodel with a seismic retrofit with new steel brace frames, and upgrades to the roof and floor diaphragms. A new façade was installed across the front of the building and a steel and wood-framed covered walkway was designed for the addition and existing aircraft hangars.
Garmin AT Building, Salem, OR
New Office Building
Salem, Oregon
Anderson Shirley Architects.
The Garmin AT Building is a 66,500 SF two story building housing engineering offices, conference rooms, and a call center. It is constructed of steel framing with brace frames to resist seismic forces, a concrete slab on metal deck second floor, and a bar joist roof system. Completed in the fall of 2014 with a construction budget of approximately $13.3 million.
Ryan Drive
Office Building
Salem, OR
CB|Two Architects
This is a new 22,000 sq. feet two-story steel framed office building in Salem. The structure consists of concrete filled metal deck atop steel framing with light gage infill walls. The lateral resisting system consists of steel brace frames and moment frames.
Salem Alliance Church
Broadway Commons
Salem, OR
CB|Two Architects
This is a new 47,000 sq. feet, 4 story, office/retail/classroom building with a large auditorium gathering space. The structural system consists of a combination of steel framing and CMU bearing walls with a lateral system consisting of a combination of moment frames, and CMU shear walls. A prayer center on the 4th floor overlooks downtown Salem with floor-to-ceiling glazing.
Edgewater and Patterson
Office Building
Salem, OR
CB|Two Architects
This is a new 10,000 sq. feet single-story steel framed office building in West Salem with a tall steel framed tower entry. This building has been designed for 2 tenant spaces and consists of a 6,000 sq. feet medical office and a 4,000 sq. feet commercial office space.
Other Commercial Projects:
660 & 680 Hawthorne Buildings, Salem, OR
925 Commercial St. Office Building, Salem, OR
AmeriTitle Building, Salem, OR
Bergstrom Buildings, Dundee, OR
Bonaventure Office Building, Salem, OR
Helping Hands Office Building, Salem, OR
Madison St. Complex, Salem, OR
Triangle Square Office Complex, Salem, OR
Washington St. Station, Clackamas, OR